AMHOMI Canada Corp.

                                                                                                             call us : 905-604-6026
 
 

 

SBM 2000


  More Info.....

 

  • SBM 2000 is a complete system for boring raises up to 30 ft (9 m) in diameter and up to 7,500 ft (2,300 m) in length.
  • The system includes an electric / hydraulic power pack with integral control station and tools required to make or break threaded pipe connections.
  • Four main hydraulic cylinders which guide the travel of derrick, are in direct line with the drive train, this permits to have the thrust load directed through the pilot point of the machine. This gives greater stability and less deviation of the pilot hole at any angle. This also reduces wear and stress on structural members, drive spindle and drill pipe components.
  • Infinitely variable seed and constant torque of the hydraulic drive enable you to adjust rotary seed to exactly mach your drilling conditions.
  • Shifting is done hydraulically for smoothly changing from high-speed range for pilot hold drilling or into the low-speed range for reaming.

  

 

 

SBM 1000


  More Info.....

 

  • SBM 1000 is the biggest and strongest raise bore machine of the SBM family, and is capable of boring holes up to 18 ft (5.5 m) in diameter and 2,300 ft (701 m) in length.
  • Provides over 1 million lbs (5,000 kN) of max thrust reaming
  • Two main hydraulic cylinders guide traveling of the derrick in direct line with drive train providing stability and less deviation of the pilot hole at any angle.
  • Includes electric / hydraulic power pack with remote control station
  • Infinitely  variable speed and cobstand torque allow adjustment for specific drilling conditions
  • Dependability and quality make this machine ideal for the longest and biggest hole requirements in the field.

 

 

 

SBM 900


 More Info.....

 

  • SBM 900 provides stability for high capacity loads up to 16.4 ft (5.00 m) in diameter and 2,000 ft (610 m) in length.
  • Two main hydraulic cylinders guide traveling of the derrick in direct line with drive train providing stability and less deviation of the pilot hole at any angle. 
  • Includes electric / hydraulic power pack with remote control station
  • Infinitely  variable speed and cobstand torque allow adjustment for specific drilling conditions
  • Alignment reduces wear and stress on structural members, drive spindle and drill pipe connections.

 

 

 

 

 

SBM 800


  More Info....

  

  • SBM 800 is a complete system for boring raises up to 14 ft ( 4.3 m) in diameter and up to 2,200 ft (670 m) in length.
  • Includes electric / hydraulic power pack with remote control station.
  • Infinitely variable speed and cobstand torque allow adjustment for specific drilling conditions.
  • SBM 800 can set for vertical drilling in a station height of only 17 ft (5 m)

 

 

 

SBM 700


  More Info.....

 

  • SBM 700 is a mid-sized raise bore machine capable of boring holes up to 12 ft (3.66 m) in diameter and 1,500 ft (457 m) in length.
  • Includes electric / hydraulic power pack with remote control station
  • Infinitely variable speed and cobstand torque allow adjustment for specific drilling conditions.
  • Low profile allows for drilling in heights of 13 ft (4.0 m)

 

 

 

SBM 400


 More Info......

 

  • Complete system for drilling holes up to 7 ft (2.10 m) with the 400 SP.
  • Includes electric / hydraulic power pack with remote control station
  • Infinitely variable speed and cobstand torque allow adjustment for specific drilling conditions
  • Three models available: SBM 400 SP, SBM 400 LP, and SBM 400 SR
  • SBM 400 has extremely low profile, and allows for station drilling is as little as 12 ft (3.6 m) using 3 ft drill rods.

 

 

SBM 400 SR


 More Info......

  

 

  • Angles up to 30°
  • Self propelled
  • No Concrete pan necessary
  • 3' Drill Rods 

 

 

 

SBX 27


 More Info.....

 

  • SBX 27 is a small boxhole machine for boring holes as large as 4 ft (1.2 m) in diameter with 384,000 pounds (1,700 kN) of thrust.
  • The drill comes with a shock resistant hydraulic drive of low spedd and high torque.
  • System includes a removable chute to protect the drill and deflect the chips, nonrotating stabilizers, an electro-hydraulic power pack with integral controls, a remote control station and tools to make or break threaded 10 in x 3 ft drill pipe joints.
  • A pipe positioner and a crawler may be designed according to customer requirements.
 

SBM 300


 More Info....

 

  • Complete system for drilling holes up to 39.00 in (1.0 m) in diameter; and up to 1000 ft (300 m) in length.
  • Includes electricity / hydraulic power pack with remote control station
  • Infinitely variable speed and cobstand torque allow adjustment for specific drilling conditions
  • Extremely low profile allows for drilling in station height of only 9.5 ft (2.9 m)

  

 

                                                                                                    
                                For more information please visit STU BLATTNER                                                       Click HERE to download machines and specifications

 
 
 
 

Web designed by: Amir